eCab--mini e cigarette

This latest mini ecigarette— eCab is highly recommended for its replaceable atomizer and battery.
Each eCab atomizer is made up of an eGab atomizer head (the same as eGo-C atomizer head type A) and a special eCab atomizer body. so you can just replace the coil head when the atomizer does not work.
Each eCab battery consists of an eCab battery housing and a changeable li-ion 10440 330mAh battery. You can replace a new Li-ion 10440 battery and charge the li-ion battery separately.
The battery has a constant output voltage of 3.3v and 10 seconds cut-off time.
Moreover, the battery has 5-click lock/unlock function, reverse battery protection and low voltage protection.
5-click lock/unlcok function : Press the button 5 times within 2.0 seconds to lock/unlock the battery.
Reverse battery protection: while battery is installed upside down.the control panel will cut off the power supply,protecting the battery and control units .
Low voltage protection: When the battery voltage is lower than 3.3V, LED blinks 40 times ,the battery will shut down.
Please note: The threading of eCab is unique. It is NOT compatible with any atomizers or batteries with 510/eGo threading!

Each kit includes:
*1pc eCab Atomizer cone
*3pcs eCab Atomizer head 
*1pc eCab Battery housing (1pc battery housing includes 1pc battery body and 1pc battery cap)
*2pcs eCab 360mAh rechargeable Li-ion 10440 battery
*3pcs eCab transparent empty catridges
*1pc eCab Battery Charger
*1pc wall adapter
*1pc English Instruction Manual
Brand: Trueman
Unit: Set
Shipping weight:335g
Colors: Black/White/Silver/Red/Pink
Size of ecigaratte: Length 130mm; Diameter 10mm
Threading:eCab
Package: gift box
How to replace the atomizer head ? (Please check graphic instruction)
* Unscrew the atomizer cone with your hand.
* Take out the old atomizer head.
* Assemble the new atomizer head.
* Screw the atomizer cone.
How to Charge the battery?
* Unscrew the battery cap
* Take the battery out
* Insert the 360mAh battery into eCab Charger battery
* Make sure that the polarity of battery is correct
* Plug the eCab charger into USB wall charger or on the computer directly
* Charging time: 2 hours
Warranty:
180 days for eCab battery housing.
Only accept DOA for other parts.
 Please refer to Warranty Policy for details.

eGo RS Charger

This charger is eGo-RS battery charger replacement. To charge the 14500 battery of eGo-RS, first take the battery out of eGo-RS battery housing, then put it into the battery charger. Please note the positive and negative end of the battery.
Brand: Trueman
Unit: 1 pc
Weight: 30g
Colors: black
Input voltage: AC100-240v/ 47-63HZ
Output voltage: 3.7v/450mah
End-of-charge voltage: 4.2v+/- 1%
Notes: The output of it is 3.7v 450mah. The charging will stop automatically at 4.2v when it's fully charged.

This universal charger can charge various batteries, such as 10440(330mah) eCab battery, 14500(750 and 900 mah) eGo-RS battery, 18350(900mah) battery and 18650(2200mah) battery.

eGo RS 14500 Battery

This is a Trueman 14500 rechargeable li-ion battery replacement. To set up a whole eGo-RS battery, first insert the 14500 rechargeable battery into trueman eGo-RS battery housing. Then push the battery cap into the housing until it locks correctly.
Brand: Trueman
Unit: 1 pc
Weight: 20g
Colors: blue and purple
output voltage: 3.7v
Capacity: 750mah/900mah
How to charge the battery?
* you can use an external battery charger. The output of it is 3.7v 450mah. The charging will stop automatically at 4.2v when it's fully charged.
* you can also put it into the eGo-RS housing and charge it with an eGo USB charger directly. The usual charging time is 2.5 hours.

How to Use VMax

How to Use Electronic Cigarette VMax?

One of the greatest feature of VMax is: using only one button to access different menu functions through a series of clicks.

(Notes: the display should be in “off” state before you press the button every time.)

Function 1: Power Adjust Up

1. Press the button 3 times in a row when "1.Uu" is shown on the display .

2. Leave the button idle for 2 seconds. The display will change to show the last voltage selected.

3. Once the voltage is displayed, each time you press the button the voltage will advance to the next higher setting: 3.1,3.2,3.3 etc. When it reaches 6.0, it will be back to 3.0 and go up again.

4. when you reach the desired setting, leave the button idle for 2 seconds. The setting will be saved and VMax will resume normal operation.

Function 2: Power Adjust Down

1. Press the button 4 times in a row when "2.Ud" is shown on the display .

2. Leave the button idle for 2 seconds. The display will change to show the last voltage selected.

4. Once the voltage is displayed, each time you press the button the voltage will advance to the next lower setting: 5.9,5.8,5.7 etc. When you reach 3.0, it will be back to 6.0 and go down again.

4. when you reach the desired setting, leave the button idle for 2 seconds. The setting will be saved and VMax will resume normal operation.

Function 3: Power on/off

1. Press the button 5 times in a row until "3.So" is shown on the display .

2. Leave the button idle for 2 seconds. The display will show the last setting , “on” or “off”.

4. Each time you press the button the display will toggle between on/off

4. when you reach the desired setting, leave the button idle for 2 second. If you select "OF" the VMax will go into standby mode.

Function 4: Battery Check

1. Press the button 6 times in a row until “4.Uc” is shown on the display.

2. Leave the button idle for 2 seconds, the digital display will show your battery voltage measurement.

3. The battery voltage will be displayed for 2 seconds, then the display will automatically turn off.

Function 5: Atomizer Check

1. Press the button 7 times in a row when “5.dR” is shown on the display,

2. Leave the button idle for 2 seconds, then the setting will be saved and the display will show your atomizer resistance.

Function 6: LED ON/OFF

1. Press the button 8 times in a row when "6.Lo" is shown on the display.

2. Leave the button idle for 2 seconds, the display will show the current setting: ON/OFF .

3. Each time you press the button, the setting will toggle between on/off.

4. when you reach the desired setting, leave the button idle for 2 seconds. The setting will be saved and VMax will resume normal operation.

Other functions:

The display will show the below error code when there is short circuit:

1. F1: resistance of the cartomizer’s heating coil is bigger than 0.5R, or smaller than 1.3R

2. F2: resistance of the cartomizer’s heating coil is smaller then 0.5R

Suggested Cartomizer ohm:

3v-4v for 1.5 ohm

4v-5v for 2.0-2.5 ohm

5v-6v for 3.0 ohm

Features of VMax

This newest type of variable voltage electronic cigarette VMax is equipped with a smart microprocessor which allows you to adjust the voltage from 3.0v to 6.0v in 0.1v increments.
VMax has the built-in three digital display which allows you see the voltage being adjusted in number-form.
VMax uses a single button to access different menu functions through a series of clicks. Moreover, with shortcircuit protection, over discahrge protection and reverse battery protection, VMax is very safe to use.
Last, VMax can well connect with any atomizer with 510 thread.
Brand: Trueman
Unit: 1pc
Shipping weight: 120g
Battery: 2 pcs stacked 18350 batteries
Capacity: 1800mah(2 pcs 18350 batteries)
Colors: stainless/chrome/chrome black
Size: 118*19.5mm

The VMax Kit includes:
2 × 18350 Battery
1 × VMax housing
1 × universal charger

Electronic Cigarette— 601-C

For more, pls CONTACT:
Skype: truemanecig004

Chrome Lava Tube Starter kit

For more, please CONTACT:
Skype: truemanecig004

Metallic Black Lava Tube in Fashionably New Color

For more, pls CONTACT:
Skype: truemanecig004

Stylis and Attractive Electronic Cigarette Starterkit eCab

for more, pls CONTACT:
Skype: truemanecig004

eGo-RS starter kit===More convenient and cost-effective

             eGo-RS starter kit===More convenient and cost-effective

Two kinds of starter kits
various colors
two kinds of battery capacities

 for your choice!!!

for more, pls contact:
Skype: truemanecig004

CE4 V2 clearomizers with spring electrode and customized resistance

Are u fed up with your CE4 V2 with LR(2.1-2.4ohm) and SR(2.5-2.9ohm)? Do u still worry about your CE4 V2 not connecting perfectly well with all batteries?

 

If so, then come to KISS the newest CE4 V2 clearomizers with spring electrode and customized resistance. 

 

 

For more, pls CONTACT:

Skype: truemanecig004

Newest eGo Battery: Battery-replaceable eGo-RS

Hi guys, here comes the newest eGo battery— eGo-RS battery, which is battery-replaceable, so more lasting and economical.

Now we have many colors for your choice: black, white, pink, titanium, stainless, blue and red.

Battery capacity: 750mah and 900mah



For more, pls contact:
Email: sales04@trueman-ecig.com
Skype: truemanecig004
Web: www.trueman-ecig.com

Mini 350 mah ego battery

How to Use eGo-RS(battery-replaceable) battery?

How to use eGo-RS battery:

Picture 1 is what you get.

Step 1: Please twist the metal bottom cap to the right or left like Picture 2 until you see Picture 3.

Step 2: Then Pull it out with some force, and Picture 4 will come before your eyes.

Step 3: Put the 14500 battery into the body.

(Notes: please notice the position of the positive and negative of the battery.)

Step 4: Push the metal bottom cap back with some force, twist to the right or left until it comes back to Picture 1.

The rest coming after these is just the same as regular eGo-T batteries... Enjoy your vaping!

Picture 1

Picture 2

Picture 3

Picture 4

Picture 5

For more, pls leave me messages, I will contact u soon!

eGo-RS(battery-replaceable) with Clearomizers

eGo-RS(battery-replaceable) with CE4, Thor CE4 and Tanko Clearomizers

For more, pls Skype me(truemanecig004) or leave messages, I will contact u soon.

eGo-RS (battery-replaceable eGo battery)

eGo-RS with regualr ego t battery 650mah

2012 Newest eGo Battery, eGo-RS Battery

               2012 Newest eGo Battery, eGo-RS Battery  

       This eGo-RS is newly released. The greatest advantage of it is that its battery  can be replaced, so if you often feel annoyed about the short life of your eGo batteries, if you want your e-cigarette battery live longer than before in an economical way, then eGo-RS will be the best solution.
     

NEW VERSION OF LAVABUTE WITHOU ADAPTER

Features:

This new chrome-plated lavatube with ego-t thread can be well matched with all atomizers or cartomziers of 510 and ego-t. Its output voltage can be adjusted from 3.0-6.0v in 0.1v increments.

Specifications:

Size: L125mm*D22mm
Material: Chrome-plated
Working voltage: 3.0-6.0v
Battery capacity: 2200mah/900mah
Full battery can keep for: about 2000mouthfuls
Charge time:2-2.5hours

Contents:
2pcs  CE4 atomizers
2pcs  18650 batteries
1pc   lavatube battery holder
1pc   charger

CONTACTS:
Sophie Wey
Skype: truemanecig004
Email: sales04@trueman-ecig.com
WEB: www.trueman-ecig.com

Newest Blister Packaging of Ego-t and CE4

Newest Blister Packaging of Ego-t and CE4

CONTACTS:

Sophie
Skype: truemanecig004
Email: sales04@trueman-ecig.com
WEB: www.trueman-ecig.com

COIL-REPLACEABLE TANKO CLEAROMIZER--HOW DO YOU LIKE IT

3.5 ML COIL-REPLACEABLE TANKO CLEAROMIZER


1. The coil head of it is replaceable.

2. Five various resistances( 1.8-2.4-2.8ohm) for choice.

3. No leak, Easy to fill,clean, Big vapor, New design.

4.Clean taste and great vapor

5.Easy to refill ejuice

6.Ejuice level visible

7.Fit most batteries with 510/eGo threading like riva/ego-t/ego-c/ego-w

CONTACTS:

Sophie Wey

Skype: truemanecig004
Email:  sales04@trueman-ecig.com

Characteristic E-cigarette Ego-t Batteries—How do You Like it?

CONTACTS:

SKYPE: truemanecig004

EMAIL: sales04@trueman-ecig.com

website: www.trueman-ecig.com

HOW TO USE E-CIGARETTE LAVATUBE KIT?

How to use lavatube e-cig kit?

 

1, swing the battery

Step one: Twist offthe cover

Step two: put the battery in it.

Step 3: Screw on the cover.

☆when use the battery, please enter the 3 bottom 5 times to active the battery.

☆Enter bottom 1(+) to increase the voltage and enter the bottom 2(-)to reduce the voltage.

 

2, screw the atomizer.

Either 510 thread atomizer（DCT,CE2,510）is ok for the e-cig kit.

Step 1: Install the 510 thread atomizer

Step 2: put the 510 thread atomizer into the lavatube battery.

 

☆when enjoy it you should keep enter the button 4, then the cartomizer will keep working.

☆The resistance for 510 3.3ohm. and the voltage can be adjusted as you like.

You can also use CE2 in to VV e-cig kit. But in this case, The voltage should be around 4.2v.

CE4 Clearomizer can also be used into this battery with a 510-ego adopter.

 

KONTACTS:

SKYPE: truemanecig004

EMAIL: sales04@trueman-ecig.com

website: www.trueman-ecig.com

 

UPGRADED VARIABLE VOLTAGE BATTERY FOR EGO SERIES

Features:
1. With LCD display showing the amount of puffs and remaining  capacity of the battery.

2. Choose the voltage you like best. Add 0.1v for each press "+" ,  and decrease 0.1v for each press "-". (3.1,3.2,3.3,....6.0v)

3. Two charging ways. Charge it by using USB charger or battery  charger.

4. Various choices for battery capacity. You can choose 14500  battery of 750mah, 800mah, 900mah or 1200 mah as you like.

5. Power-saving. Before enjoying it, please unlock it by entering  the ON-OFF button for 5 times. When stopping, please lock it in  the same way.

For more details, pls SKYPE: truemanecig004  or  MAILTO: sales04@trueman-ecig.com